+7 (812) 929-8183,
+7 (812) 929-8283

Перечень возможностей Ubiquiti Unifi по мере обновления UniFi Controller Software

Release 1.2.1
Release 1.2.1 is the first mass production version of UniFi.

‎12-16-2010 10:58 PM

Release Notes
1. fix the problem where in-bound VLAN traffic not being forwarded correctly
2. fix the qos setting not taking effect
3. enhance wireless performance and stability
4. handle mobile devices (especially in power-saving mode) better
5. general bug fixes, UI enhancements, etc.
6. bg / n device and their power-saving status at a glance

Release 1.2.2

‎02-20-2011 11:01 AM

Release Notes
1. VLAN issue fixed (returning vlan traffic should be forwarded correctly)
2. fixed AP stuck at adoption state and improved adoption speed (turn Auto Firmware Upgrade "on" for best result)
3. fixed manual AP's channel selection for certain country codes (e.g. Australia)
4. enhance wireless performance (especially for power-saving clients)
5. added UAP-LR support
6. accepts Database Backup from different versions (1.2.0 and 1.2.1)


Release 1.2.3

‎03-21-2011 06:13 PM

Release Notes
1. fix the latency issue with iPad, iPod4 and other mobile devices that are very aggressive with power-saving
2. Andriod phone connection problem
3. guest portal redirect crashing Andriod browser
4. fix the heartbeat interval
5. debian package (debian 5 - debian 6, ubuntu 9.04 - ubuntu 11.04)

Release 1.3.0

‎04-15-2011 03:45 PM

Release Notes
- allow special characters for admin password / WLAN SSID and PSK
- static IP per ap
- WLAN override per AP (VLAN, SSID)
- supports PicoM2
- allow LED to be disabled
- fix the blackberry device connection problem

Release 1.3.2

‎11-01-2011 03:53 PM

Release Notes
- fix static IP issue
- fix WLAN override issue
- allow guest expiration to be set for guest portal
- UI enhancements
- TX power respecting EIRP at all time (UniFi AP)

Release 2.2.0

‎11-14-2011 10:19 AM

We're releasing 2.2.0, the official V2 release.
For people running 1.x, this update brings many major/useful features. For people running 2.x beta, we believe you'll be pleasantly surprised, too.

New Features

Wireless Uplink
- Supports wireless uplink, each wired AP can have up to 4 downlinks
- Allows runtime change of network topology
- Allows wireless adoption of 2.0.0 APs in default state

L3 Manageability
- Allows the controller to run in a different subnet
- Allows no-touch AP provisioning by using DHCP Option 43 or DNS
- Provides UniFi Discovery utility to make local AP to inform back to the controller in NOC or Cloud

Hotspot with Billing and Customization
- Built-in support for billing integration (Paypal) accepting major credit cards and paypal, teaser package
- Built-in support for voucher-base authentication
- Built-in hotspot manager for voucher creation, guest management, payment refund
- Allows full customization of portal pages
- API support for voucher generation, guest authorization, guest unauthorization, etc.

Rate Limiting
- You can limit the upload / download speed per WLAN. You can even override it per user.
- Allow different rate-limiting and usage-limiting for each hotspot package

Other Features
- Better/finer TX Power control
- Advanced WPA settings - WPA1-Only / WPA2-Only, TKIP / CCMP(AES). Allow all printable characters for Passphrase
- WLAN Override: add enable/disable, PSK override
- Google Map integration (you can use Google Map in the Map view)
- Load balancing (specifying desired number of clients per AP)
- Offline client management
- Allowed/whitelisted subnets for guest access
- Running UniFi as Windows service
- Shows "Managed by Other" for APs that were managed by old controller. An "advanced adoption" option is added to allow take-over.
- Email notification for alerts
- SSL certificate import
- More API support

Release 2.2.1

‎12-19-2011 09:00 AM

Release 2.2.1 is deemed not reliable. See Release 2.2.3.

Release Note
- SMTP send email problem
- Controller performance improvement
- Use 64-bit mongod in Windows whenever possible
- UI: fix UI issue on older browsers (Firefox 3.6, Safari 5.0.x)
- more flexible subnet configuration
- fix Map disappear after logout
- allow ASCII WEP key

Release 2.2.5

‎02-28-2012 02:08 PM

2.2.5 addresses a few outstanding issues since 2.2.0.

Release Note
- fix AP reboots issue
- fix guest redirect problem after authorized
- fix iOS guest redirect
- fix wireless uplink issue in L3 deployments
- Controller performance improvement
- fix SMTP send email problem
- Use 64-bit mongod in Windows whenever possible
- UI: fix UI issue on older browsers (Firefox 3.6, Safari 5.0.x)
- more flexible subnet configuration
- fix Map disappear after logout
- add 2-hour trial into portal sample page
- allow ASCII WEP key

From 2.2.5->2.3.2

- bandwidth limiting enhancement (make it more in sync with results from speedtest or wget, etc)
- portal redirect enhancements
- enhanced adoption/handling when DNS is not reachable
- enable UAP-Outdoor's secondary ethernet port
- Paypal to allow other currency
- allow connectivity/uplink monitor to be disabled completely (for people who don't use wireless uplink and don't want wireless to be disabled when gateway is not reachable)
- fix controller stopping issue when installed as Windows service
- UI enhancements

From 2.3.2 -> 2.3.3

- fix guest bypassing guest portal
- fix UniFi start-up problem with fresh installation using Java 7 add Ubuntu 12.04 (precise) support
- fix SSID validation
- fix Paypal processing of Master Card
- fix incorrect client count in the statistics
- allow mail sender to be configurable for sending alerts

From 2.3.3 -> 2.3.4

- fix DHCP option 43 broken in 2.3.x
- Google Map fix - allows map type selection, saves as image (this is more of a workaround, before we get rid of Flash)

From 2.3.4 -> 2.3.5

- SSID to allow all printable characters
- fix last-seen in All Clients tab (add Disconnected/All filter as well)
- minor UI fixes

From 2.3.5 -> 2.3.6

- fix issues around wireless uplink and adoption for newer units with DC:9FB OUI
- use 64-bit JRE if installed
- make Allowed Subnets more flexible (which in turn enables AirPrint in the guest network)
- VoIP enhancement (mapping DSCP 46 to Voice, for getontoit)
- portal redirect enhancements (thanks to jaffadog and coastcruiser)
- security enhancements (credit to Moritz Frenzel)

From 2.3.6 -> 2.3.8

- fix the PicoM2 -> UniFi conversion for newer units with DC:9FB OUI

Release 2.3.8

‎10-11-2012 11:33 AM

Release Note
- bandwidth limiting enhancement (make it more in sync with results from speedtest or wget, etc)
- portal redirect enhancements
- enhanced adoption/handling when DNS is not reachable
- enable UAP-Outdoor's secondary ethernet port
- allow connectivity/uplink monitor to be disabled completely (for people who don't use wireless uplink and don't want wireless to be disabled when gateway is not reachable)
- fix controller stopping issue when installed as Windows service
- Google Map fix - allows map type selection, saves as image (this is more of a workaround, before we get rid of Flash)
- Paypal to allow other currency
- add Ubuntu 12.04 (precise) support
- add Java 7 support
- fix for wireless uplink and PicoM2->UniFi conversion for newer units with DC:9FB OUI
- VoIP enhancement (mapping DSCP 46 to Voice, for getontoit)
- UI enhancements

Release 2.3.9

‎12-20-2012 04:13 PM

2.3.9 is released as a hotfix to 2.3.8.

Release Note
- fix AP stopping accepting client issue in certain environments
- AP reset-default improvement - holding reset button during booting up (until LED turns off) to reset the config
- UAP-Pro performance and compability improvements
- allow Guest wireless to be turned off when controller is not reachable (see FAQ)
- allow more flexible capitive portal subnets to be added (see FAQ)
- controller performance improvement
- UI enhancements
NOTE: Starting from 2.3.9, auto-upgrade is turned off by default. A rolling-upgrade mechanism is in the work.


‎09-13-2012 10:05 PM
Now we're working on 3.0.0 (originally called 2.5.0) where we take wireless experiences, mobility, and the management to the next level.
Release V3 - Currently in Limited Beta (3.0.0 released on 2/8; 3.0.1 on 2/26)

Multi-site management, multi admin, Read-only Admin
Rogue AP detection
Seamless Roaming
More descriptive email alerts
More detailed user information / management
WLAN Group
Minimum RSSI
Basic SNMP Support
Voucher customization
Controller performance enhancement

Feature Requested

More options for voucher generation in Hotspot Manager, voucher customization
Use domain name in Allowed Subnets
Check for upgrade link
Alerts history in AP dialog
Hour of use for Guest
Time-based voucher, dynamic throttling
remote syslog too verbose
DHCP Server in AP
Manage wireless bridges / backbone AirMax links
More flexible hostapd.conf
Other payment options (authorize.net, IP Pay, PayPal Standard)
MAC authentication
allowed MAC
User-based VLAN
26.03.2013

Возврат к списку