Самые распространенные в отрасли универсальные граничные маршрутизаторы для крупных предприятий и операторов связи. Маршрутизаторы серии Cisco 7200 отличаются превосходным соотношением цена/производительность, предлагая самый широкий спектр поддерживаемых интерфейсов и непревзойденный набор функций. Компактные по размерам и построенные на высокопроизводительных модульных процессорах, в том числе на процессоре Cisco 7200 NPE-G2, эти устройства отличаются самой высокой в отрасли эксплуатационной надежностью и удобством в управлении. Благодаря модульной архитектуре эти маршрутизаторы позволяют создавать масштабируемые решения, отвечающие самым различным требованиям к плотности, производительности и ассортименту услуг, одновременно обеспечивая защиту инвестиций с учетом будущего развития сети.
В числе преимуществ маршрутизаторов серии Cisco 7200:
- Поддержка самого широкого спектра функций IP/MPLS в программном обеспечении Cisco IOS (управление качеством обслуживания, агрегирование широкополосных подключений, безопасность, мультисервисный доступ, мультипротокольная коммутация на основе меток и другие)
- Широкий ассортимент гибких, модульных интерфейсов (от DS0 до OC12)
- Поддержка интерфейсов Fast Ethernet, Gigabit Ethernet, Packet Over Sonet и других
- Полностью модульная конструкция в формате 3RU
- Полная поддержка терминации L2TP и PPP
- Поддержка до 16000 широкополосных абонентских сессий
- Акселератор услуг на базе технологии Cisco PXF
- Поддержка различных протоколов
- Низкие первоначальные капиталовложения
- Масштабируемость и гибкость; идеально подходят для модернизации сетей
Cisco 7200 Series Routers
Models Comparison
Models |
7204VXR
Product page |
7206VXR
Product page |
7201
Product page |
Size
|
3 RU
Height 13.34 cm
Width 42.67 cm
Depth 43.18 cm |
3 RU
Height 13.34 cm
Width 42.67 cm
Depth 43.18 cm |
I RU
Height 4.39 cm
Width 41.20 cm
Depth 43.94 cm |
Slots
|
4 single Port Adapter Slots
1 I/O Controller Slot
1 Network Processing Engine Slot |
6 single Port Adapter Slots
1 I/O Controller Slot
1 Network Processing Engine Slot |
1 single Port Adapter Slot
N/A
N/A - built-on Engine - NPE-G2 with 4 GE ports |
Security Modules
|
SA-VAM2+
C7200-VSA |
SA-VAM2+
C7200-VSA |
SA-VAM2+ |
Performance
|
2 Mpps with NPE-G2 |
2 Mpps with NPE-G2 |
2 Mpps |
Backplane Capacity
|
1.8 Gbps with NPE-G2 |
1.8 Gbps with NPE-G2 |
1.8 Gbps |
Note: C7200-VSA is not
supported on the Cisco 7201 router lacks an I/O slot required for
C7200-VSA.
Cisco 7200 Series Routers Overview
The Cisco 7200 VXR Series Router delivers exceptional
performance/price, modularity, and scalability in a compact form factor
with a wide range of deployment options.
Cisco 7200 VXR Series Router
With processing speeds up to 2 million packets per second, port- and
service adapters ranging from NxDS0 to Gigabit Ethernet, and OC-3 as
well as an unparalleled number of high-touch IP services, the Cisco
7200 VXR series is the ideal Services Aggregation WAN/MAN edge
device for enterprises and service providers deploying any of the
following solutions:
- WAN edge-Award-winning quality-of-service (QoS)
feature performance
- Broadband aggregation-Up to 16,000
Point-to-Point Protocol (PPP) sessions per chassis
- Multiprotocol Label Switching provider edge (MPLS PE)-Number
one choice for provider edge deployment today
- Voice/video/data integration-Time-division
multiplexer (TDM)-enabled VXR chassis and voice port adapters
- IP-to-IP Gateway Support-Direct
IP-interconnections
- IP Security virtual private networking (IPSec VPN)-Scalable
to 5,000 tunnels per chassis
- High-End Customer Premises Equipment (CPE)-For
managed WAN services saving equipment, transport and administrative cost
The Cisco 7200 VXR addresses these solution requirements by
integrating functions previously performed by separate devices into
a single platform. Through this integration, the Cisco 7200 VXR
provides a single, cost-effective platform that supports:
- High-density LAN and WAN interfaces
- Broadband subscriber services aggregation, including PPP, RFC 1483
termination, and Layer 2 Tunneling Protocol (L2TP) tunneling
- Digital T1/E1 TDM trunk termination for voice, video, and data
- High-density multichannel T3/E3 and T1/E1 with integrated channel
service unit/data service unit (CSU/DSU)
- ATM, Packet over SONET (POS), and Dynamic Packet Transport (DPT)
connectivity
- ATM IMA (Inverse Multiplexing over ATM) for voice, video, and data
- Direct IBM mainframe channel connectivity
- Light-density Layer 2 Ethernet switching
Figure 1. The Cisco 7200 VXR Router Series with
Network Processing Engine NPE-G2

The Cisco 7200 VXR Series offers a rich set of capabilities that
address requirements for performance, density, high reliability,
availability, serviceability, and manageability (Table 1).
Table 1. Cisco 7200 VXR Features and Benefit
Features |
Benefits |
Up to 2 Mpps Processing Capability |
Provides high-performance routing and
processing performance |
Maximum Connectivity Options |
Meets a variety of topology requirements
with the widest range of port densities and interface
options |
Breadth of Services |
Supports QoS, security, MPLS, broadband,
multiservice, voice, IP-to-IP Gateway and management
features for next-generation networks |
Investment Protection |
Low initial investment with upgrade and
redeployment capability |
Applications
VPN Gateways-With the new VPN Service Acceleration Module (VSA), the
Cisco 7200 VXR provides high-performance, hardware-assisted
encryption, key generation, and compression services suitable for
site-to-site VPN applications.
- Broadband subscriber aggregation services-For
small- and medium-density aggregation for network operators, competitive
local exchange carriers (CLECs), Internet service providers (ISPs),
post, telephone, and telegraph networks (PTTs), and enterprises
worldwide. Key features include:
- Flexible, modular interfaces for traffic aggregation: OC-3, Gigabit
Ethernet, DS3, Fast Ethernet, Ethernet, POS
- IP and ATM QoS/class of service (CoS)
- MPLS VPN and full L2TP support
- Feature-rich IP services and PPP termination support
- Multiservice capabilities-The Cisco 7200 VXR
Series provides a scalable voice gateway solution, ranging from 2 to 20
T1s and E1s. The advanced QoS and multiservice features of the Cisco
7200 VXR Series makes it an ideal platform in a large number of
enterprise and service provider deployments as managed multiservice CPE
or as a voice gateway.
- Managed network services CPE-The Cisco 7200 VXR
is a cost-effective CPE solution with a field upgradable modular
platform. Key features for revenue-generating services include QoS, MPLS
(MPLS VPN, MPLS QoS, MPLS TE), WAN edge services (VLAN support, NetFlow,
NBAR), Security services (NAT, ACL, hardware encryption for VPNs), and
voice/video/data integration.
- Enterprise WAN aggregation-The Cisco 7200 VXR
provides a flexible aggregation solution that accommodates a wide range
of connectivity and service options, offers high quality and
reliability, and can scale to meet future requirements. The Cisco 7200
VXR's performance per price ratio in the DS0 to OC-3/STM1 range makes it
the ideal platform for aggregating multiple branch offices or remote
locations.
- IP-to-IP Gateway Support-Direct
IP-interconnections between VoIP networks lower costs, lower latency,
improve voice quality, and offer greater flexibility to support emerging
services when compared with public-switched telephone network (PSTN) or
time-division multiplexing (TDM) interconnections.
The Cisco Multiservice IP-to-IP Gateway provides a
network-to-network interface point for:
- Signaling interworking (H.323, SIP)
- Media interworking (DTMF, fax, and modem)
- Address and port translations (privacy and topology hiding)
- Billing and CDR normalization
- QoS and bandwidth management (QoS marking using TOS)
Product Specifications
Table 2. Cards, Ports, Slots
|
Cisco 7204 VXR |
Cisco 7206 VXR |
Configurable Slots without Port Adapter Jacket Card |
4 |
6 |
Configurable Slots with Port Adapter Jacket Card |
5 |
7 |
Ethernet (10BASE-T) Ports |
32 |
48 |
Ethernet (10BASE-FL) Ports |
20 |
30 |
Fast Ethernet (TX) Ports |
4 |
Up to 6 |
Fast Ethernet (FX) Ports |
4 |
Up to 6 |
EtherSwitch Port Adapters |
2 |
2 |
100VG-AnyLAN Ports |
4 |
Up to 6 |
FDDI (FDX, HDX) Ports |
0 |
0 |
ATM Ports (T3, OC-3) |
4, 4 |
Up to 6, 4 |
Packet over SONET |
4 |
6 |
ATM-CES Port Adapters (Data, Voice,
Video), Dual-Wide |
1 |
1 |
Token Ring (FDX, HDX) Ports |
16 |
24 |
Synchronous Serial Ports |
32 |
48 |
ISDN BRI Ports (U, S/T) |
16, 32 |
24, 48 |
ISDN PRI, Multichannel T1/E1 Ports |
32 |
48 |
Multichannel T3 Ports |
Up to 4 |
Up to 6 |
HSSI Ports |
Up to 8 |
Up to 12 |
Packet over T3/E3 Ports (Integrated DSU) |
Up to 10 |
Up to 14 |
IBM Channel Interface Ports (ESCON and
Parallel) |
6 |
6 |
VPN Acceleration Module |
1 |
1 |
Components
Table 3. Chassis
Feature |
Cisco 7204 VXR |
Cisco 7206 VXR |
Chassis/Rack |
16 with side-to-side air flow9 with RDS mounting system for front-to-back airflow |
Same as Cisco 7204 VXR |
I/O Card Slots |
1 |
Same as Cisco 7204 VXR |
Port Adapter Slots |
4 |
6 |
Midplane |
2 independent 32-bit, 50-MHz PCI buses
with an aggregate bandwidth of 1.2 Gbps when used with
NPE-400. 3 independent 32-bit, 50-MHz PCI buses with an
aggregate bandwidth of 1.8 Gbps when used with NPE-G1 or
NPE-G2 |
Same as Cisco 7204 VXR |
Online Insertion and Removal (OIR) |
Yes |
Same as Cisco 7204 VXR |
Field-Replaceable Components |
Processor, memory, power supply, I/O card,
and port adapters |
Same as Cisco 7204 VXR |
Additional Standard Components |
AC power supply, AC power cord |
Same as Cisco 7204 VXR |
Table 4. Environmental Conditions
|
Cisco 7204 VXR |
Cisco 7206 VXR |
Operating Temperature |
0 to 40°C |
Same as Cisco 7204 VXR |
Storage Temperature |
-20 to 65°C |
Same as Cisco 7204 VXR |
Operating Humidity |
10 to 90% (noncondensing) |
Same as Cisco 7204 VXR |
The Cisco 7200 VXR Series chassis also include a Multiservice
Interchange (MIX), which supports switching of DS0 time slots via
MIX interconnects across the midplane to each port adapter slot.
The midplane and the MIX also support distribution of clocking
between channelized interfaces on the Cisco 7200 VXR to support
voice and other constant-bit-rate applications. The VXR midplane
provides two full-duplex 8.192-Mbps TDM streams between each port
adapter slot and the MIX, which is capable of switching DS0s on all
12 8.192-Mbps streams. Each stream can support up to 128 DS0
channels.
The MIX in the Cisco 7200 VXR provides the ability to switch DS0
time slots between multichannel T1 and E1 interfaces, much like TDM
capabilities. This enables the Cisco 7200 VXR to switch DS0 voice
channels on a T1/E1 interface on one port adapter to and from
separate voice-processing port adapters. It also enables DS0s to be
switched through the Cisco 7200 VXR without any processing, which is
a requirement in certain voice configurations.
Processors
The Cisco 7200 VXR Series sets new standards in meeting requirements
for high-performance Layer 3 services at an affordable price for
both service providers and enterprises.
The following processors are currently available for the Cisco 7200
VXR Series:
- NPE-G2
- NPE-G1
- NPE-400
- NPE-225
The NPE processors offer exceptional price/performance for most
applications, including enterprise WAN aggregation, CPE,
multiservice, and VPN. These processors provide the greatest
flexibility when deploying new features.
Key features supported by the Cisco 7200 VXR Series processors
include security, QoS, traffic management, and network management.
More information on the Cisco 7200 VXR processors is available at:
Input/Output Controllers
Each Cisco 7200 VXR Series chassis has a dedicated slot for an I/O
controller. The following types of I/O controllers are currently
supported, including some with LAN ports for increased density
without using a port adapter slot:
- C7200 VXR-I/O, Cisco 7200 VXR I/O Controller
- C7200 VXR-I/O-2FE/E, Cisco 7200 VXR I/O Controller with dual autosensing
10/100 Ethernet ports
- C7200 VXR-I/O-GE+E, Cisco 7200 VXR I/O Controller with 1 Gigabit
Ethernet Interface Converter (GBIC) port and one Ethernet port
More information on I/O controllers is available at:
http://www.cisco.com/en/US/products/hw/routers/ps341/products_data_sheet09186a0080088724.html
Port Adapter Jacket Card
Cisco 7204 VXR and 7206 VXR chassis has a dedicated slot for an I/O
controller slot that can be used to install a Port Adapter Jacket
Card. The Port Adapter Jacket Card can hold single (selected) Port
or Service Adapter for easy port and slot expansion.
The Cisco 7200 VXR Series Port Adapter Jacket Card supports the
following port adapters:
- Cisco VPN Acceleration Module 2 (SA-VAM2)-Supported only in
combination with NPE-G1
- AES wide key crypto card (SA-VAM2+)
- 2-Port Packet/SONET OC3c/STM1 Port Adapter (PA-POS-2OC3)
- 2 Port T3 Serial Port Adapter Enhanced (PA-MC-2T3+)
- 1 port multichannel STM-1multi- and single mode port adapter
(PA-MC-STM-1MM, PA-MC-STM-1SMI)
- 1-port Enhanced Port Adapter Series (PA-A3-T3, PA-A3-E3, PA-A3-OC3MM,
PA-A3-OC3SMI, PA-A3-OC3SML, PA-A6-T3, PA-A6-E3, PA-A6-OC3MM, PA-A6-OC3SMI,
PA-A6-OC3SML)
Note: The Cisco Mix-Enabled T1/E1 Port
Adapters for the Cisco 7200 VXR Series router are not compatible with
the Port Adapter Jacket Card.
Software
The Cisco 7200 VXR Series Port Adapter Jacket Card is supported in
the following Cisco IOS®
Software versions at the time of first customer shipment:
- For NPE-G1
- 12.4(7)
- 12.4(6)T1-
- For NPE-G2
- 12.4(4)XD
- 12.2SB8
- For ATM port adapter on both NPE-G1 and NPE-G2
- 12.4(15)T1
- 12.2(31)SB8
Interfaces
The Cisco 7200 VXR Series offers scalable density with the widest
range of connectivity options including:
- Ethernet 10BASE-T and 10BASE-FL
- Fast Ethernet 100BASE-T (RJ-45 and MII)
- Gigabit Ethernet
- Token Ring (half and full duplex)
- Synchronous serial ISDN BRI, PRI, HSSI, T3, E3
- Multichannel T1, ISDN PRI
- Multichannel E1, ISDN PRI
- Multichannel T3, E3
- Multichannel STM-1
- Packet Over SONET (POS)
- Dynamic Packet Transport (DPT)
- ATM (single-mode and multimode)
- ATM-CES
- Digital Voice Port Adapter, Enhanced
- Mix-enabled T1/E1
- Integrated Service Adapter (ISA)
- VPN Acceleration Module (VAM)
- VPN Service Adapter (VSA)
The Cisco 7200 VXR shares the same port adapters with the Cisco
7400, 7500, and 7600 FlexWAN module, protecting customer investment
in interfaces, providing a clear migration path, and simplifying
sparing.
More detailed information on specific port adapters is available at:
http://www.cisco.com/en/US/products/hw/modules/ps2033/prod_module_series_home.html
Options-Features
Key features supported by the Cisco 7200 VXR include:
- Cisco Express Forwarding
- QoS
- Low-Latency Queuing (LLQ)
- Class-Based Weighted Fair Queuing (CBWFQ)
- Class-Based Weighted Random Early Detection (CBWRED)
- Policing
- Marking
- Shaping
- Committed Access Rate (CAR)
- Generic Traffic Shaping (GTS)
- Frame Relay Traffic Shaping (FRTS)
- Modular QoS command-line interface (MQC) support
- Network-Based Application Recognition
- MPLS
- MPLS VPN
- MPLS QoS
- MPLS traffic engineering
- Any Transport over MPLS
- Broadband aggregation
- PPPoX
- RBE
- PPP over X (PPPoX) with L2TP
- MLPPP
- Multiservice/voice
- cRTP
- LFI
- FRF11/12
- MLPPP
- MLFR
- IP-to-IP Voice Gateway
- SRST
- Tunneling
- GRE
- L2TP
- UTI
- L2TPv3
- 6to4
- Other
- ACLs
- NAT
- NetFlow
- Firewall
- Multicast
- Flexible Packet Matching
- IPSec VPN
- Secure Multicast
- IPv6
Performance
- Up to 2 Mpps with NPE-G2 processor
- Up to 1 Mpps with NPE-G1 processor
- Up to 400 kpps with NPE-400 processor
- Up to 225 kpps with NPE-225 processor
Table 5. Memory
|
Cisco 7204 VXR |
Cisco 7206 VXR |
Processor Memory |
128 MB (default for NPE-225)256 MB (default for NPE-400 and NPE-G1, max for NPE-225)512 MB (max for NPE-400)1 GB (max for NPE-G1 and default for NPE-G2);
In
future: optional upgrade to 2 GB for NPE-G2) |
Same as Cisco 7204 VXR |
PCMCIA Flash Disk Memory Card (optional,
up to 2 slots available) |
48 MB, expandable to 128 MB for I/O controllers64 MB, expandable to 256 MB for NPE-G1 and NPE-G2 |
Same as Cisco 7204 VXR |
Compact Flash Disk Memory Card (optional
for NPE-G1 and NPE-G2) |
64 MB, expandable to 256 MB for NPE-G1256 MB for NPE-G2 |
Same as Cisco 7204 VXR |
Network Management
Network Management Applications
- Element Manager Software (EMS) for the Cisco 7200 VXR Series
- Cisco Secure Policy Manager
- Cisco VPN Device Manager (VDM)
- Cisco QoS Device Manager (QDM)
- Cisco Info Center
- CiscoWorks
- Security Device Manager
- MPLS Diagnostics Expert
- Secure command-line interface using Secure Shell (SSH) Protocol
- HTML-based management tool
Table 6. Physical Specifications
|
Cisco 7204 VXR |
Cisco 7206 VXR |
Height |
13.34 cm |
13.34 cm |
Width |
42.67 cm |
42.67 cm |
Depth |
43.18 cm |
43.18 cm |
Weight |
Chassis is fully configured with a network
processing engine, I/O controller, four port adapters, two
power supplies, and a fan tray: ~22.7 kg |
Chassis is fully configured with a network
processing engine, I/O controller, six port adapters, two
power supplies, and a fan tray: ~22.7 kg |
Table 7. Power (The Cisco 7200 VXR is available
with single and dual power supply options for both AC and DC.)
|
Cisco 7204 VXR |
Cisco 7206 VXR |
AC-Input Power |
370W max. (single or dual power supply
configuration) |
Same as Cisco 7204 VXR |
AC-Input Voltage Rating |
100-240 VAC wide input with power factor
correction |
Same as Cisco 7204 VXR |
AC-Input Current Rating |
Not to exceed 5A max. at 100 VAC and 2.5A
max. at 240 VAC with the chassis fully configured |
Same as Cisco 7204 VXR |
AC-Input Frequency Rating |
50/60 Hz |
Same as Cisco 7204 VXR |
AC-Input Cable |
18 AWG 3-wire cable, with 3-lead IEC-320
receptacle on the power supply end, and a country-dependent
plug on the power source end |
Same as Cisco 7204 VXR |
DC-Output Power |
280W max. (single or dual power supply
configuration) |
Same as Cisco 7204 VXR |
DC-Input Power |
370W max. (single or dual power supply
configuration) |
Same as Cisco 7204 VXR |
DC-Input Voltage Rating |
-24 to -60 VDC for global DC power
requirements |
Same as Cisco 7204 VXR |
DC-Input Current Rating |
Not to exceed 13A max. at -48 VDC (370W/-48 VDC =
7.7A typical draw)Not to exceed 8A max. at -60 VDC (370W/-60 VDC =
6.2A typical draw) |
Same as Cisco 7204 VXR |
DC Voltages Supplied and Maximum
Steady-State Current Ratings |
+5.2V at 360A+12.2V at 9A-12.0V at 1.5A+3.5V at 13A |
Same as Cisco 7204 VXR |
DC-Input Cable |
14 AWG recommended minimum, with at least
3 conductors rated for at least 60°C |
Same as Cisco 7204 VXR |
Frequency |
50/60 Hz |
Same as Cisco 7204 VXR |
Airflow |
~80 cfm |
Same as Cisco 7204 VXR |
Power Dissipation |
~370W max. configuration |
Same as Cisco 7204 VXR |
Heat Dissipation |
370W (1262 BTUs) |
Same as Cisco 7204 VXR |
Noise Level |
Front (I/O Controller and PA side): 44.2 dbBack (Power supply side): 43.7 dbLeft (Fan side): 47.2 dbRight: 44.8 db |
Same as Cisco 7204 VXR |
Protocols
The Cisco 7200 VXR Series Router supports the following standard Internet protocols:
- Layer 2 and Layer 3 protocols-Address
Resolution Protocol (ARP), IPCP, IP forwarding, IP host, IP Multicast,
PPP-over-ATM, TCP, Telnet, Trivial File Transfer Protocol (TFTP), User
Datagram Protocol (UDP), transparent bridging, virtual LAN (VLAN), MPLS,
and IPv6
- Layer 3 routing protocols-EIGRP, IGRP, IS-IS,
OSPF, BGP, PIM, and RIP
- Network management and security-AAA, CHAP, FTP,
RADIUS, SNMP, PAP, and TACACS
- RFC 1483-Multiprotocol Encapsulation over ATM
AAL 5
- RFC 1577-Classical IP and ARP over ATM AAL 5
- ARP-Determines the destination MAC address of a
host using its known IP address
- BOOTP-Uses connectionless transport layer
(UDP); allows the switch (BOOTP client) to get its IP address from a
BOOTP server
- Internet Control Message Protocol (ICMP)-Allows
hosts to send error or control messages to other hosts; is a required
part of IP; for example, the ping command uses ICMP echo requests to
test if a destination is alive and reachable
- IP or IP over ATM-Suite used to send IP
datagram packets between nodes on the Internet
- TCP-A reliable, full-duplex,
connection-oriented end-to-end transport protocol running on top of IP;
for example, the Telnet protocol uses the TCP/IP protocol suite
- Packet Internet groper (ping)-Tests the
accessibility of a remote site by sending it an ICMP echo request and
waiting for a reply
- TFTP-Downloads network software updates and
configuration files (Flashcode) to workgroup switch products
- Reverse Address Resolution Protocol (RARP)-Determines
an IP address knowing only a MAC address; for example, BOOTP and RARP
broadcast requests are used to get IP addresses from a BOOTP or RARPD
server
- Serial Line Internet Protocol (SLIP)-A version
of IP that runs over serial links, allowing IP communications over the
administrative interface
- PPP-Provides host-to-network and
switch-to-switch connections over synchronous and asynchronous circuits
- Simple Network Management Protocol (SNMP)-Agents
that process requests for network management stations and report
exception conditions when they occur; requires access to information
stored in a MIB
- Telnet-A terminal emulation protocol that
allows remote access to the administrative interface of a switch over
the network (in-band)
- UDP-Enables an application (such as an SNMP
agent) on one system to send a datagram to an application (a network
management station using SNMP) on another system; uses IP to deliver
datagrams; TFTP uses UDP/IP protocol suites
- Dynamic Host Connection Protocol (DHCP)-Lets a
host automatically obtain their IP address, subnet mask, and default
route from a pre-configured DHCP server on the network
- Hot Standby Router Protocol (HSRP)-Provides
fast cut-over to a backup router in the event of a system or link
failure
Product Regulatory Approvals and Compliance
The following table lists regulatory compliance standards for the Cisco 7204 VXR and 7206 VXR chassis.
Product System Requirements
Hardware Requirements
Hardware for Cisco 7200 VXR Series Router includes:
- 7204 VXR or Cisco 7206 VXR chassis
- Network Processing Engine
- Input/Output controller
- Processor memory
- Input/Output controller memory
- Power supply
- Console and auxiliary cables
- Second power supply, accessories
- Port adapters
- Service adapters
Note: You must order a network processing
engine for the Cisco 7206 VXR and Cisco 7204 VXR. With the NPE-225 and
NPE-400, you must also order an input/output controller. With the NPE-G1
and NPE-G2 processor, the input/output controller is optional.
Software Requirements
To locate the minimum supported Cisco IOS Software Release by Cisco
IOS release for all Cisco 7200 VXR Series products, use the Software
Advisor Tool at
http://tools.cisco.com/Support/Fusion/FusionHome.do.
In general, the minimum support Cisco IOS Software releases for the
Cisco 7204 VXR and Cisco 7206 VXR chassis are 11.1(16)CA or later;
11.2(11)P or later; or 11.3(1) or later. Consult the Software
Advisor Tool above for more detailed information since the minimum
Cisco IOS release support varies, for example, depending on the
Network Processing Engine, the IO Controller Cards and the
Port/Service Adapters The Cisco 7200 VXR chassis is configured with.
Product Ordering Details
Ordering Instructions
Please visit
http://www.cisco.com/public/ordering_info.shtml to place
an order.
Product Part Number
To find part descriptions and part numbers for Cisco products, use
the online Cisco Pricing Tool at
http://www.cisco.com/cgi-bin/front.x/pricing.
The base chassis product IDs are shown below. In addition, various
bundles, spares, and options are available. To access part
descriptions and part numbers use the online Cisco Pricing Tool at
http://www.cisco.com/cgi-bin/front.x/pricing.
Table 9. Product Part Number
Part Number |
Description |
CISCO7204VXR |
Cisco 7204 VXR, 4-slot chassis, 1 AC
supply with IP software |
CISCO7206VXR |
Cisco 7206 VXR, 6-slot chassis, 1 AC
supply with IP software |