Expansion slot 1, PCI-e x8, Full high,
Full-length (PCI-X optional)
6.
Optional 12.7mm DVD-ROM, or DVD-RW Drive
7.
Two upfront USB connectors
7.
UID button/LED
8.
Power Button, UID Button, and Front LED Indicators
8.
Video connector
9.
Support for up to two Non-Hot Plug SATA or SAS
Hard Drives
9.
DL120 G5 HP Lights Out 100c management NIC port
(optional)
10.
Two PCI express Slots (2 PCI-Express x8
connectors standard, one x8, one x4 Lanes)
10.
NIC Port
11.
Keyboard connector
What's New
Adding
Intel® Xeon® 5200 and 7400 processor sequence
At a Glance
The
HP ProLiant DL120 G5 Server is an entry-level rack-optimized server
providing you with all confidence of a HP ProLiant server. The single
processor, 1U server is ideal for single-application IT infrastructure,
web and edge-of-network applications. The HP ProLiant DL120 provides two
PCI-Express slots with an option to replace one PCI-Express slot with a
PCI-X slot. Optional upgrades, including HP HBAs and Smart Array
Controllers, provide support for SAS hard disk drives. An optional
DL120G5 HP Lights Out 100c (LO100c) Remote Management Card provides
cost-effective remote management from anywhere, anytime. Plus, you get
the cost-effective solution of a single-processor platform with the
performance advantages of dual-core or quad-core.
Processor:
Intel® Xeon® 7400
processor sequence
Intel® Xeon® 5200 processor sequence
Quad-Core Intel® Xeon® 3300 processor sequence
Quad-Core Intel®
Xeon® 3200 processor sequence
Dual-Core Intel® Xeon® 3100 processor
sequence
Dual-Core Intel® Xeon® 3000 processor sequence
Dual-Core Intel® Core™2 E4600 processor
Dual-Core Intel® Pentium®
E2160 processor
Single-Core Intel® Celeron® 440 processor
Single-Core Intel® Celeron® 420 processor
Intel® 3200 Chipset with
up to 1333MHz Front Side Bus (FSB)
Memory:
Supports up to 8 GB of PC2-6400 (800 MHz) Unbuffered DDR2 ECC SDRAM Memory
4 DIMM sockets
Storage Controller:
Embedded SATA Controller with RAID 0/1 support
NOTE:
Transfer Rate: 1.5 Gb/s SATA
Internal
Drive Support:
Two 3.5" (Large Form Factor) SATA or SAS
hard drives
SAS drives require optional SAS Host Bus Adapter
(HBA) or Smart Array Controller
Internal storage
capacity of up to 1.5TB (2 x 750GB SATA hard drives)
Optional
DVD-ROM or DVD-RW optical drive
Network Controller:
Embedded NC105i Gigabit Server
Adapter
Expansion Slots:
Two total slots:
(1) Full length PCI Express x8 slot (x8
connector)
Can be replaced with a full-length 64-bit /133MHz
PCI-X slot
Up to 5 Total: (2) front; (1) internal; (2) rear
accessible ports
Internal USB port (optional) for flexible
storage, security, or USB drive key deployment
Management:
Standard Lights Out 100 IPMI 2.0 reporting
DL120G5 HP Lights Out
100c Remote Management Card (Optional)
Front Panel status LEDs
including system health and UID
Form
Factor:
1U (1.69" / 4.30 cm) Rack Mount Chassis
27.5" (69.85 cm) Deep
New fixed mounting rails included with all models
Warranty:
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of HP Authorized Channel Partners
resellers. Hardware diagnostic support and repair is available for three
years from date of purchase. Support for software and initial setup is
available for 90 days from date of purchase. Enhancements to warranty
services are available through HP Care Pack services or customized service
agreements. SATA hard drives have a one-year warranty. SAS Enterprise drives
have a three-year warranty. NOTE:
Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support
with next business day response. (3-1-1 warranty in AP and Brazil, excluding
Japan). Warranty repairs may be accomplished through the use of Customer
Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory
CSR parts are designed for easy replacement. A travel and labor charge will
result when customers decline to replace a Mandatory CSR part; 2) Optional
CSR parts are also designed for easy replacement but may involve added
complexity. Customers may choose to have HP replace Optional CSR parts at no
charge. Additional information regarding worldwide limited warranty and
technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
NOTE:
For the Standard Features shipped in the "Factory Integrated Models", please
see the "Configuration Information - Factory Integrated Models" section.
Processor One of the following depending on Model
Quad-Core Processors
Quad-Core Intel® Xeon® processor X3360 (2.83GHz, 12MB L2 cache, 95
Watts, 1333MHz Front Side Bus FSB)
NOTE: Available via Configure-to-order only. See Factory Integrated
Models section for more details.
Quad-Core Intel® Xeon®
processor X3350 (2.66GHz, 12MB L2 cache, 95 Watts, 1333MHz FSB)
NOTE:
Available via Configure-to-order only. See Factory Integrated Models section
for more details.
Quad-Core Intel® Xeon® processor X3330 (2.66 GHz, 6MB L2 cache, 95
Watts, 1333MHz FSB) NOTE:
Available via Configure-to-order only. See Factory Integrated Models
section for more details.
Quad-Core Intel® Xeon®
processor X3320 (2.5GHz, 6MB L2 cache, 95 Watts, 1333MHz FSB)
NOTE:
Available via Configure-to-order only. See Factory Integrated Models section
for more details.
Intel® Xeon® processor X3220
(2.4GHz, 8MB L2 cache, 1066Watts, MHz FSB) NOTE: Available via
Configure-to-order only. See Factory Integrated Models section for more
details.
Quad-Core Intel® Xeon®
processor X3210 (2.13GHz, 8MB L2 Cache, 95 Watts, 1066MHz FSB)
NOTE:
Available via Configure-to-order only. See Factory Integrated Models section
for more details.
Intel® Xeon® processor E5200 (2.50 GHz, 2 MB L2 cache, 65Watts, 800MHz
Front Side Bus FSB, 2M) NOTE:
Available via Configure-to-order only. See Factory Integrated Models
section for more details.
Intel® Xeon® processor E7400 (2.80 GHz, 3MB L2 cache, 65Watts, 1066MHz
Front Side Bus FSB, 3M) NOTE:
Available via Configure-to-order only. See Factory Integrated Models
section for more details.
Dual-Core Processors
Dual-Core Intel® Xeon® processor E3120 (3.16 GHz, 6MB L2 cache, 65
Watts, 1333MHz FSB) NOTE:
Available via Configure-to-order only. See Factory Integrated Models
section for more details.
Dual-Core Intel® Xeon®
processor E3110 (3.0GHz, 6MB L2 cache, 65 Watts, 1333MHz FSB)
NOTE:
Available via Configure-to-order only. See Factory Integrated Models section
for more details.
Dual-Core Intel® Core™2 processor E4600 (2.4GHz, 2MB L2 cache, 800MHz
FSB) NOTE:
Available via Configure-to-order only. See Factory Integrated Models section
for more details.
Single-Core Intel® Celeron® processor 440 (2.00GHz, 512KB L2 cache,
800MHz FSB) NOTE: Available via Configure-to-order
only. See Factory Integrated Models section for more details.
Single-Core Intel® Celeron®
processor 420 (1.60GHz, 512KB L2 cache, 800MHz FSB)
NOTE:
Available via Configure-to-order only. See Factory Integrated Models section
for more details.
Cache Memory One of the following
depending on Model
12 MB L2 Cache NOTE: For Models
with Intel® Xeon® processor X3360, and X3350.
8 MB L2 Cache NOTE: For
Models with Intel® Xeon® processor X3330, X3320, E3120, and E3110.
6 MB L2 Cache
NOTE:
For Models with Intel® Xeon® processor X3320 and E3110.
4 MB L2 Cache
NOTE:
For Models with the Intel® Xeon® processor 3065.
2 MB L2 Cache
NOTE:
For Models with the Intel® Core2 processor E4600.
1 MB L2 Cache
NOTE:
For Models with the Intel® Pentium processor E2160.
512 KB L2 Cache
NOTE:
For Models with the Intel® Celeron processor 440 and 420.
Chipset
Intel® 3200
Chipset
Memory Protection
ECC
Memory
One of the following depending on Model
Type
PC2-6400 (800MHz) Unbuffered
ECC DDR2 SDRAM
Interleaving optional (Enabled when DIMMs populated in pairs)
DIMM Sockets
4
Standard - Xeon 3065 and
Pentium E2160 Models
1 GB (1 x 1 GB)
Standard - Xeon 3320 Model
2 GB (2 x 1 GB)
Maximum Memory
8 GB
Network Controller
Embedded NC105i Gigabit Server Adapter
Expansion Slots
Technology
Bus
Width***
Connector Width
Bus Number*
Device No.**
Form
Factor
Notes
1
(Standard)
PCIe
X8
x8
0
1
Full length, full height slot
This PCIe slot can be replaced with optional
PCI-X slot below
2
(Standard)
PCIe
X4
x8
0
28
Low profile slot
1
(Optional)
PCI-X (133MHz, 3.3Volt)
64-bit
N/A
0
1
Full length, full height slot
* Default bus
assignment (in decimal). Inserting cards with PCI bridges may alter the
actual bus assignment number.
** Slots are
enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus)
*** Indicates the
number of physical electrical lanes running to a PCI-e connector.
Storage
Controllers
Integrated Intel® 82801IR
Serial ATA Host Controller with RAID 0/1 support. NOTE: The non-hot-plug drive option
kits include a SATA cable along with the drive itself. This cable allows the
drives to be connected to the embedded SATA controller. The cables are point
to point.
SAS and SATA controllers
available via PCI card option NOTE: If a HBA or SAS controller is
ordered for SATA RAID or SAS support, the 4 Lane SAS/SATA Host Fan Out Cable
Kit (P/N 457692-B21) must also be ordered to connect the drives.
Storage
Optical Drive
Optional 12.7mm DVD-ROM, or DVD-RW Drive
Hard Drives
Non-Hot Plug SATA /SAS
Up to 2 non-hot plug
SATA/SAS 3.5" drives NOTE:
SAS requires optional HBA or SA card.
Lights Out LO100c is a Remote Management Card (RMC) for ProLiant 100 series
servers that do not have embedded LO100i. The LO100c has all the features of
the LO100i Advanced license and allows customers, or their service
providers, to remotely manage ProLiant servers over a LAN or the Internet
from anywhere, anytime regardless whether the server is located in the same
building, across town, or around the globe.
With LO100c, users can
acquire complete remote control with Virtual KVM (graphical hardware-based,
remote console). Users can also access the server's serial console, control
system power, update system firmware and software, as well as monitor system
environmental conditions. The LO100c remote management card can be accessed
from a web browser or command line interface. This virtual "at-the-server"
functionality means administrators stay in control of remote HP ProLiant 100
series servers.
The HP Lights-Out100c consists of a management
processor and firmware that provides cost-effective, entry-level lights-out
functionality, basic system board management functions, and diagnostics.
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice and customize your profile to
receive various new alerts as they become available, on a weekly or monthly
basis.
ROMPaq
software and drivers
The latest software, drivers, and firmware fully optimized and tested
for your ProLiant server and options, available through software and
drivers download pages website at:
http://www.hp.com/go/support.
Industry Standard Compliance
ACPI 3.0
PCI 2.3 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 2.0
IPMI 2.0
Intelligent Manageability
Automatic Server Recovery (ASR) Integrated Management Log Drive
Parameter Tracking (with Smart Array Controllers) Dynamic Sector
Repairing (with Smart Array Controllers) Pre-Failure Warranty (covers
processors, SAS hard drives, and memory) BIOS Serial Console Front and
Rear Unit ID (UID) button/LED
Security
Power-on password
Keyboard password USB Port control Removable DVD-ROM Drive Assembly
(optional) Dedicated LO100c management NIC port (optional)
Administrator's password
Server Power Cords
North America
One 6' Highline (IEC-IEC)
power cord ships standard
Japan
One 6' Highline (IEC) power
cord and one 6' Lowline power cord ship standard
ROW
One 6' Highline (IEC) power
cord ships standard
NOTE:
HP ProLiant DL120 G5p server ship standard worldwide with a C13 to C14 2M
Highline jumper cord. Japanese models also include a 2M Lowline power cord.
If customers require a local power cord, they can check the power cord
matrix for the appropriate country specific cord. Please see the following
power cord matrix:
http://www.hp.com/go/powercordmatrix.
Power Supply
Auto-sensing
350-Watt PFC Power Supply, CE Mark Compliant
NOTE: For more information on HP's Certified and Supported ProLiant
Servers for OS and Virtualization Software and latest listing of software
drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/supportos
and our driver download page
http://www.hp.com/support/DL120G5
Rack Airflow Requirements
Rack 10000 series Cabinets The increasing power of new
high-performance processor technology requires increased cooling efficiency
for rack-mounted servers. The 10000 Series Racks provide enhanced airflow
for maximum cooling, allowing these racks to be fully loaded with servers
using the latest processors.
CAUTION:
If a third-party rack is used, observe the following additional requirements
to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front
and rear doors, you must allow 830 square inches (5,350 sq cm) of hole
evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the
side panels of the rack must be a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front
panel U-spaces in the rack. This arrangement ensures proper airflow. Using a
rack without blanking panels results in improper cooling that can lead to
thermal damage.
NOTE: For additional information, refer to the
Setup and Installation Guide or the Documentation CD provided with the
server, or to the server documentation located in the Support section at the
following URL:
http://h18004.www1.hp.com/products/servers/proliantdl120/index.html.
Rack Kit
The DL120 G5 Fixed Rail System supports installation in racks with
square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and
HP series), with an adjustment range of 24" - 36". Installation into Telco
2 post, and 4 post, or threaded holes racks requires a 3rd party option
kit. Go to: www.racksolutions.com
for more information.
HP Factory Express Capabilities
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can choose
how their factory solutions are built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration,
racking, installation, complex configuration and design services as well
as individual factory services, such as image loading, asset tagging, and
custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant
Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx,
VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific
server model please contact your sales representative or go to:
http://www.hp.com/go/factory-express.
Service and Support
HP
Care Pack Services provide total care and support expertise with committed
response times designed to meet your IT and business needs.
HP Care
Pack services include coverage for the HP branded hardware options qualified
for the server that are purchased at the same time or afterward and internal
to the enclosure. It also includes the 22-inch and smaller external monitors
and tower UPS options up to 3kVA. These items will be covered at the same
service level and for the same coverage period as the server. Coverage of
UPS Battery is not included and standard warranty terms & conditions apply.
For servers or storage systems installed within a rack, service also covers
all HP qualified rack options installed within the same rack.
To fully
capitalizing on your HP ProLiant servers' capabilities requires a service
partner who thoroughly understands your server technology and systems
environment. HP Services, an industry leader in provision of support
solutions provides a range of support services designed to meet the varying
needs of your business. Whether an SMB, or large global corporation, HP has
ProLiant server support offers to help you speedily deploy and maximize
system uptime.
Recommended Service - simplify ProLiant
solution implementation, maintenance, and management.
Support - 3 Year 9x5 Next Business Day
coverage, excluding HP holidays only
Deployment Service - HW Installation only
Enhanced Service - optimize service level to
increase IT performance and availability.
Support - 3 Year 13x5 Same Business Day,
4-Hour response coverage only
Refer to the information on the Installation of a ProLiant on the
ProLiant Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F,
excluding HP holidays.
NOTE:
For the Standard Features shipped in the "Factory Integrated Models", please
see the "Configuration Information - Factory Integrated Models" section.
Configuration Information - Factory Integrated Models
NOTE:
This section lists some of the steps required to configure a Factory
Integrated Model. To ensure only valid configurations are ordered, HP
recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard
models listed above. Configure-to-order servers must start with a CTO
Chassis. NOTE: FIO indicates that this option only available as a
Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Intel® Xeon®
processor E5200 (2.50 GHz, 2MB L2 cache, xx65Watts, 800MHz Front Side Bus
FSB, 2M)
533991-L22
Intel® Xeon® processor E7400 (2.80 GHz, 3MB L2 cache, 65Watts, 1066MHz
Front Side Bus FSB, 3M)
533993-L22
Memory
2 GB
Unbuffered PC2-6400 ECC DIMM (1 x 2 GB)
450260-B21
1 GB Unbuffered PC2-6400 ECC DIMM (1 x 1 GB)
450259-B21
512 MB Unbuffered PC2-6400 ECC DIMM (1 x 512 MB)
450258-B21
Hard Drives
NOTE:
Transfer rates of drives are dependent on the maximum transfer rate
supported by the HBA or Controller. Refer to the HBA or Controller technical
specifications for details.
SATA Non-Hot Plug
Midline (MDL) Drives
HP 750GB 3G SATA
7.2K NHP 3.5" MDL HDD
462595-B21
HP 500GB 3G SATA
7.2K NHP 3.5" MDL HDD
458941-B21
HP 250GB 3G SATA
7.2K NHP 3.5" MDL HDD
458939-B21
SATA Non-Hot Plug
Entry (ETY) Drives
HP 160GB 3G SATA
7.2K NHP 3.5" ETY HDD
458947-B21
SAS Enterprise
(ENT) Drives 3.5" Drives, Non-Hot Plug
HP 400GB 3G SAS 10K
3.5" DP NHP ENT HDD
508232-B21
HP 450GB 3G SAS 15K
3.5" DP NHP ENT HDD
454234-B21
HP 300GB 3G SAS
15K 3.5" DP NHP ENT HDD
417950-B21
HP 300GB 3G SAS 15K
3.5" SP NHP ENT HDD
431950-B21
HP 146GB 3G SAS 15K
3.5" DP NHP ENT HDD
417855-B21
HP 146GB 3G SAS 15K 3.5" SP NHP ENT HDD
432093-B21
HP 72GB SAS 15K
3.5" SP NHP ENT HDD
432095-B21
Step 3: Choose Additional Options for Factory Integration (only one of the
following from each list unless otherwise noted)
Storage Controllers
SAS Controllers (Required if NHP SAS Hard Drive selected in Step 2)
HP Internal SAS/SATA 4-Port Cable
NOTE: This cable option kit is automatically included in any CTO
configuration when a HBA or SAS controller is selected.
457692-B21
HP Smart Array E200/128 BBWC Controller
411508-B21
HP Smart Array P800/512 MB BBWC Controller
381513-B21
SAS HBA
HP SC44Ge Host Bus Adapter NOTE:
When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are
required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
416096-B21
HP SC40Ge Host Bus Adapter, FIO NOTE:
When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are
required.
NOTE:
For additional options, please refer to the "Core Options and Additional
Options" section below. NOTE: Some options may not be factory
integratable. Please contact your local sales representative for
additional information.
NOTE: Some options may not be factory integratable. Contact your local
sales representative for additional information.
Unique Options
DL120 G5 HP Lights Out 100c Kit
469085-B21
NOTE:
This remote management card supports the DL120 G5 server only.
Memory (DIMMs)
2 GB Unbuffered PC2-6400 ECC
DIMM (1 x 2 GB)
450260-B21
1 GB Unbuffered PC2-6400 ECC
DIMM (1 x 1 GB)
450259-B21
512 MB Unbuffered PC2-6400 ECC
DIMM (1 x 512 MB)
450258-B21
Optical Drives
HP Slim 12.7mm SATA DVD-ROM
Optical Kit
481041-B21
HP Slim 12.7mm SATA DVD-RW
Optical Kit
481043-B21
Hard Drives
NOTE:
Transfer rates of drives are dependent on the maximum transfer rate
supported by the HBA or Controller. Refer to the HBA or Controller technical
specifications for details.
NOTE:
The purchase of any HBA or HP Smart Array Controller requires the purchase
of the 4 Lane SAS/SATA host fan out Cable Kit.
SAS Controllers
HP Internal SAS/SATA 4-Port
Cable
NOTE: The purchase of any HBA or HP
Smart Array Controller requires the purchase of the 4 Lane SAS/SATA host fan
out Cable Kit.
NOTE:
This option kit contains a 24" battery cable and adhesive material for
installing a battery into the server if a Smart Array E500 is integrated
outside of the factory. For all solutions, please refer to the server
QuickSpecs and User's Manual for detailed installation instructions.
SAS HBA
NOTE: The
purchase of any HBA or HP Smart Array Controller requires the purchase of
the 4 Lane SAS/SATA host fan out Cable Kit. (P/N 457692-B21)
HP SC44Ge Host Bus Adapter
416096-B21
NOTE: When using
the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
NOTE: Please see the following QuickSpecs for Technical Specifications
and additional information:
http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html (SC44Ge HBA)
SCSI
Controllers NOTE: The HP ProLiant DL320 G5p PCI-X
Riser Board Option Kit (P/N 450341-B21) is required for all PCI -X
Controllers. This option is compatible with the DL120 G5.
HP StorageWorks 1U USB
Rack-Mount Kit with one DAT 160 USB Tape Drive
AG703A
SAS
Rack-Mount Tape Solutions NOTE: HP recommends purchasing the
HP SC44Ge HBA (416096-B21) for a dedicated SAS HBA for tape.
HP StorageWorks LTO-2 Ultrium
448 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS
Rack-Mount Kit (AE459A)
DW085A
SCSI
Rack-Mount Tape Solutions NOTE: SCSI Controller required. HP
recommends purchasing the HP SC11Xe HBA (412911-B21) for a dedicated SCSI
HBA for tape.
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 SCSI Tape
Drive (Carbonite) NOTE: Pre-configured with one LTO-2 Ultrium 448 SCSI tape drive.
DW028B
Disk-Based Backup
RDX
Removable Disk Backup
HP StorageWorks RDX160 External
Removable Disk Backup System NOTE:
160GB of Disk Storage.
AJ766A
HP StorageWorks RDX320 External
Removable Disk Backup System NOTE:
320GB of Disk Storage.
AJ768A
HP StorageWorks RDX500 External Removable Disk Backup System
NOTE:
500GB of Disk Storage.
HP Monitored Power Distribution
Unit: Full Rack Version
HP 17.3 kVA S2324 Monitored PDU-
dual input, 3Ø, 24A (NA/JPN)
AF503A
HP 8.6 kVA S1324 Monitored PDU- single input, 3Ø, 24A (NA/JPN)
AF504A
HP 16.6 kVA S2140 Monitored PDU-
dual input, 1Ø, 40A (NA/JPN)
AF505A
HP 8.3 S1140 Monitored PDU-
single input, 1Ø, 40A (NA/JPN)
AF506A
HP 22.1 kVA S2316 Monitored PDU-
dual input, 3Ø, 16A (INTL)
AF507A
HP 11 kVA S1316 Monitored PDU-
single input, 3Ø, 16A (INTL)
AF508A
HP 14.7 kVA S2132 Monitored PDU-
dual input, 1Ø, 32A (INTL)
AF509A
HP 7.3 kVA S1132 Monitored PDU-
single input, 1Ø, 32A (INTL)
AF510A
HP Monitored Power Distribution
Unit: Half Rack Version
HP 17.3 kVA S348 Monitored PDU-
single input, 3Ø, 48A (NA/JPN)
AF916A
HP 22 kVA S332 Monitored PDU -
single input, 3-phase, 32A (INTL)
AF917A
HP 4.9 kVA S124 Monitored PDU-
single input, 1Ø, 24A (NA/JPN)
AF914A
HP 7.3 kVA S132 Monitored PDU-
single input, 1Ø, 32A (INTL)
AF915A
Modular Power Distribution Units 1U/0U
(Up to 32 outlets) NOTE: 1U/0U mounting brackets
shipped with
the unit (optimized for 10000 and 9000 series racks).
HP Modular Power Distribution
Units (mPDU), Low Volt Model, 24A (100-127 VAC) (NA, Japan) NOTE: This mPDU (252663-D71) may
also be used to connect the low volt model of the UPS R3000 XR.
252663-D71
HP Modular Power Distribution Units (mPDU), High Volt Model, 24A
(200-240 VAC) (NA, Japan)
252663-D72
HP Modular Power Distribution
Units (mPDU), High Volt Model, 32A (200-240 VAC) (Int'l)
252663-B31
HP Modular Power Distribution
Units (mPDU), High Volt Model, 40A (200-240 VAC) (WW) NOTE: This mPDU (252663-B21), 40A
model has a hardwired input.
252663-B21
HP Modular Power Distribution
Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW) NOTE: This PDU has a detachable
input power cord and allows for adaptability to country specific power
requirements.
252663-B24
NOTE: Please see
the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs)
QuickSpecs for additional options including shorter jumper cables and
country specific power cords:
http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html
(Worldwide) NOTE: For additional information on HP Power Distribution Units
including accessories please go to:
www.hp.com/go/pdu.
USB
Options
USB 1.44-MB External Diskette
Drive (Carbonite)
DC141B
HP 1GB USB 2.0 Floppy Drive
Key
442085-B21
ProLiant DL120 Deployment Options
Rack Adapter Kit NOTE: This kit
allows HP rack servers to fit in racks that are 24" wide.
NOTE:
xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by
custom systems, VARs and Channels). NOTE: It is mandatory to use a
shock pallet in order to ship racks with equipment installed.
NOTE: xxxxxx-B22
(shock pallet) used to ship racks with equipment installed (by custom
systems, VARs and Channels). NOTE: It is mandatory to use a shock pallet in order to ship racks
with equipment installed.
PS/2 Virtual Media Interface
Adapter, 1 pack NOTE: Requires PS/2 and one USB port on server.
AF604A
PS/2 Interface Adapter, 1 pack
262588-B21
PS/2 Interface Adapter, 8 pack
262587-B21
NOTE: Cat5e
cables are required to connect Interface Adapters to Console Switches. Cat5e
cables can be found at the following URL:
http://www.hp.com/go/kvm.
HP 1x4 Console Switch
AF611A
PS2 Server Console Cable, 6 ft,
2 pack
AF612A
USB Server Console Cable, 6 ft,
2 pack
AF613A
NOTE: For
additional information regarding KVM switches, Serial Console servers, rack
mount monitors, keyboards and all related options please see the following
URL: http://www.hp.com/go/kvm.
HP Serial Console Server Options
Server console switch 0x2x8
AF616A
Server
console switch 0x2x16
AF617A
HP 16 Port Serial Console
Server (worldwide)
AF101A
HP 48 Port Serial Console
Server (worldwide)
AF102A
Serial Adapter, RJ45-DB9 DCE
Female, 1 Pack
AF103A
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
AF110A
NOTE:
Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the
following URL:
http://www.hp.com/go/kvm.
NOTE:
For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the
following URL: http://www.hp.com/go/kvm.
Service and Support Offerings
(HP Care Pack Services)
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
UJ252E
4-Hour On-site Service, 7-Day x
24-Hour Coverage, 3 Years, Electronic
UJ253E
Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
UJ251E
Installation & Start-up Services
Hardware Services 6-Hour Call to Repair On-Site Service
Standard Memory NOTE: One of the following
depending on model:
1 GB installed (1 x 1 GB SDRAM DIMM) on Dual-Core (E2160 and 3065)
models.
2 GB installed (2 x 1 GB SDRAM DIMMs) on Quad-Core (X3320) model.
Standard Memory Plus Optional Memory
Up to 8 GB memory is available with the optional installation of PC2-6400
ECC DDR2 SDRAM Memory kits.
NOTE:
The chart below does not represent all possible configurations. For best
performance, HP recommends dual-bank interleaved mode configurations.
For dual-bank interleaved mode, DIMMs must be installed in both banks
with equal bank capacities.
Optical Drive Bay: Optional DVD-ROM, or DVD-RW drive
Drive Support
Quantity
Supported
Position Supported
Controller
Removable Media
12.7mm IDE DVD-ROM
or DVD-RW Drive
Up to 1
A
HP embedded SATA Controller NOTE: Transfer Rate: 1.5 Gb/s SATA
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
400GB 3G SAS 10K DP 450GB 3G
SAS 15K DP 300GB 3G SAS 15K DP 300GB 3G SAS 15K SP 146GB 3G SAS 15K
DP 146GB 3G SAS 15K SP 72GB 3G SAS 15K SP
Up to 2
1-2
HP 4 Internal Port SAS HBA SC40Ge with RAID (0,1, 1+0)
NOTE:
When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are
required NOTE: Transfer Rate: 1.5 Gb/s SATA, 3Gb/s SAS
SATA Non-Hot Plug
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
750GB 3G SATA 7.2K
500GB 3G SATA 7.2K
250GB 3G SATA 7.2K
Up to 2
1-2
6 Port SATA controller with
Embedded RAID NOTE: Transfer Rate: 1.5 Gb/s SATA
SATA Non-Hot Plug
Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
160GB 3G SATA 7.2K
Up to 2
1-2
6 Port SATA controller with
Embedded RAID NOTE: Transfer Rate: 1.5 Gb/s SATA
3.5" SATA Non-Hot
Plug Drives
Quantity
Supported
Position
Supported
Controller
250GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
Up to 2
1-2
6 Port SATA controller with
Embedded RAID NOTE: Transfer Rate: 1.5 Gb/s SATA
External Storage
Quantity
Supported
Position Supported
Host Controller or Adapter
50 Modular Smart Array
Up to 4
External
HP Smart Array E500/256MB Controller
Up to 4
HP Smart Array
P800/512MB BBWC Controller
60 Modular Smart Array Enclosure
Up to 8 Up to 8
External
HP Smart Array E500/256MB Controller HP Smart Array P 800/512MB BBWC
Controller
70 Modular Smart Array
Enclosure
Up
to 4 Up to 4
External
HP Smart Array E500/256MB Controller HP Smart Array P 800/512MB BBWC
Controller
Maximum Storage Capacity � (SAS drives)
Internal
900GB (2 x 450GB SAS)
External
6.30TB (1 x (14 x 450GB SAS))
Total
7.20TB
NOTE:
The External capacity section relates to the HP StorageWorks 20 Modular
Smart Array.
Maximum Storage Capacity � (SATA Drives)
Internal
1.5TB (2 x 750GB
SATA)
External
9.0TB [1 x (12 x
750GB SATA)]
Total
10.50TB
NOTE:
In order to implement integrated SATA RAID with Support CD on Windows
2000/2003, the use of a floppy drive is necessary.
NOTE: The
External capacity section relates to the HP StorageWorks 20 Modular Smart
Array.
Tape and Disk-Based Backup
NOTE:
For a complete listing of compatible tape and disk-based backup offerings,
please visit:
www.hp.com/go/connect
Position
Supported
Controller
Controller Part Number
HP StorageWorks USB Tape
DAT 72 USB
DAT 160 USB
1U USB Rack-Mount Kit
External
USB 2.0 Port
N/A
HP
StorageWorks SAS Tape Drives, External
LTO-2 Ultrium 448 SAS
1U Rack-Mount Kit
External
HP SC44Ge Host Bus Adapter
416096-B21
HP StorageWorks SCSI Tape
Ultrium 448
DAT 72
DAT 160
1U SCSI Rack-Mount Kit
External
HP SC11Xe Host Bus Adapter
412911-B21
HP StorageWorks RDX Removable
Disk Backup System
RDX160
RDX320
External
USB 2.0 Port
N/A
HP StorageWorks D2D Backup
Systems
D2D120
D2D130
D2D2503i
- Click on the system of
interest. Example: DL120 G5 - Follow the instructions of the next
screens.
Power Supply Output (per power supply)
Rated Steady-State Power
350 W (at 115/230 VRMS), 350 W (at 115/230 VRMS)
Maximum Peak Power
350
W (at 115/230 VRMS), 350 W (at 115/230 VRMS)
System Inlet Temperature
Operating
10° to 35°C (50° to 95°F) at sea level with an altitude derating of
1.0°C per every 300 m (1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum
rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by
the type and number of options installed. System performance may be
reduced if operating with a fan fault or above 30°C (86°F).
Non-operating
-30°
to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative
Humidity
(non-condensing)
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb
temperature, non-condensing.
Non-operating
5 to
95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb
temperature, non-condensing.
Altitude
Operating
3050 m (10,000 ft). This value may be limited by the type and number of
options installed. Maximum allowable altitude change rate is 457 m/min
(1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min
(1500 ft/min).
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when the
product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with
ISO 9296 (ECMA 109).
Idle
LWAd
6.26 B
LpAm
43.8 dBA
Operating
LWAd
6.28 B
LpAm
44.5 dBA
Emissions Classification (EMC)
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438;
GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and statements.
Supports
multiple logical volumes Setup through ROM based Array Configuration
Utility
Installation scripting support
NOTE: This controller does not support Hot Plug functions or LED
functions.
RAID OS Support
Microsoft Windows Server 2003 NOTE:In order to implement integrated SATA RAID
with Smart Start 7.90 on Windows 2000/2003, the use of a floppy drive is
necessary.
Linux (Red Hat, SuSE, UnitedLinux)
Embedded NC105i PCIe Gigabit Server Adapter
Network Interface
10Base-T/
100Base-TX/
1000Base-TX
Combines a
triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a
triple-speed Ethernet transceiver.
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab
1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method
Four lane (x4), 100MHz
PCI Express Reference Clock
Network Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX (Half and Full-Duplex)
2000Mb/s
Connector
RJ-45 connector
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up to
328 ft (100 m)
10/100/1000Base-TX
Category 5 UTP; up to 328 ft
(100 m)
Environment-friendly Products and Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be
recycled, recovered or disposed of in a responsible manner.
The EU
WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at:
http://www.hp.com/go/green. These instructions may be used by recyclers
and other WEEE treatment facilities as well as HP OEM customers who
integrate and re-sell HP equipment.
The information contained herein is subject to change
without notice.
Microsoft and Windows NT are US
registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel
Corporation in the U.S. and other countries.
The only
warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions
contained herein.
For hard drives, 1GB = 1 billion
bytes. Actual formatted capacity is less.
