+7 (812) 929-8183,
+7 (812) 929-8283

CPEo 400

Motorola CPEo 400 Series Cost effective fixed and nomadic broadband services

CPEo 400

The outdoor CPEo 400 Series Customer Premises Equipment (CPE) lets opera­tors extend critical broadband coverage and enhance service to end-users in both dense urban areas and remote regions.

The cost effective, easy-to-deploy, and easy to man­age CPEo 400 meets the market need for standards based, fixed broadband wireless access in licensed spectrum. Based on 802.16e technology, the CPEo 400 delivers cost-effective, high-performing broad­band wireless access. The outdoor mounted CPEo 400 provides significant improvement in the cover­age and capacity capabilities of the network, reduc­ing the number of base sites required to address a given geography and boosting the bandwidth avail­able to end-users.


Motorola's outdoor CPEo 400 offers end users superior performance over indoor CPEs since the WiMAX reception is not impeded by concrete and brick walls or RF blocking glass and steel in building structures.

Subscribers may also deploy the CPEo 400 to maxi­mize reception via a line of sight connection to the base station which is not possible with an indoor unit. The CPEo 400's outdoor antenna is highly di­rectional and can point precisely to the base-station without in-building path loss.


The CPEo 400 supports remote management capa­bility and allows management and health monitor­ing of the devices from a centralized network or element management system. Built on a flexible hardware platform, the CPEo 400 supports no-touch, remote software upgrades for easy instal­lation of product updates, new features and en­hancements.


All Motorola CPE products employ Multiple Antenna Technology, which delivers increased range and high­er throughput. When used with Motorola's dual-an­tenna solutions, WAP 400 Series Access Point with diversity, both uplink and downlink performance are significantly enhanced by advanced signal process­ing techniques, such as Cyclic Shift Transmit Diversity (CSTD).


The outdoor CPEo 400 is well suited to service a multi-dwelling building. A CPEo 400 positioned on a rooftop can provide broadband access to multiple tenants in a single building. Similarly an enterprise can use the outdoor CPEo 400 to offer broadband service and VPN connec­tion from field offices back to the main corporate network, acting as the WiMAX gateway.


  • Delivering the best economics and advanced wire­less solution for fixed broadband access
  • Operating at 2.3GHz, 2.5GHz or 3.5GHz with Orthogonal Frequency Division Multiplexing (OFDM) non-line-of-sight (NLOS) technology helps to overcome common urban obstacles
  • Integrated with 802.3af Power over Ethernet(PoE) support making it easy and fast to install
  • Built-in antenna and waterproof design for Outdoor application
  • Lower total cost of Point to Multipoint wireless ac­cess system
  • SNMP and AAA (Authentication, Administration and Authorization) support for operation and maintenance


The CPEo 400 product suite is part of the MOTOwi4 portfolio of broadband wireless access tech­nologies, a comprehensive platform of wireless broadband solutions and services. MOTOwi4 is extending the reach and capabilities of operator networks, from basic connections in unserved regions to high-speed, mobile access in dense metro markets. MOTOwi4 solutions help people access information and share content wherever they might be.

Motorola is committed to leading the industry with end-to-end WiMAX solutions addressing the full scope of the operator's deployment needs including access, core, devices, network management and services.


Характеристика Значение
Application Stationary and nomadic only
Frequency band 3.400 - 3.600 GHz ; 2.300 - 2.400 GHz ; 2.496 - 2.700 GHz
Channel Bandwidth 5 and 7MHz for 3.400 - 3.600GHz5 and 10MHz for 2.300 - 2.400 GHz, 2.496 - 2.700 GHz
Air Interface OFDMA
Architecture 802.16e
Configurability Remote configuration/software upgradeable
Physical Dimensions 203 x 203 x 70 mm
Weight 1.6 kg
Operating Temperature -40°C to 55°C
Maximum Output Power (PA and Antenna) 40 dBm EIRP (at 2.3 GHz and 2.5 GHz)= 26dBm + 14dBi (30 degree internal ant.) (PA and Antenna) 42 dBm EIRP (at 3.5GHz) = 27 dBm + 15 dBi (25 degree internal ant.) Actual EIRP may vary as a function of government regulation and spectral mask require­ments (country specific
Antenna Integrated, 3 dB beam width of 30 degrees Azimuth and degrees elevation, 14 dBi Gain (at 2.3GHz and 2.5GHz)Integrated, 3 dB beam width of 25 degrees Azimuth and degrees elevation, 15 dBi Gain (at3.5GHz)
Polarization Vertical
Power Requirements 90 to 264 VAC/ 50-60 Hz
Power consumption 55 VDC / 45 Watts
Power Management Automatic transmit power control (Up to -20 dB)
Protocol Support IPv4, TCP, UDP HTTP SNMP
QOS 5 levels
Security DES and AES (optional), FIPS Compliant (for AES)
LAN Interface IEEE 802.3 (10/100BASE-T Ethernet)
VLAN Support IEEE 802.1Q
Firewall Built in Firewall supporting 253 LAN clients
NAT Functionality NAT, DMZ Host
VPN IPSec, PPTP & L2TP Pass-Through
DHCP Built-in DHCP server for LAN clients, DHCP client for WAN
Regulatory Compliance Mandatory applicable requirements. For example: ETSI EN302 021,753; RoHS/WEEE.Optional Surge Suppressors, where required