Carrier-Class, High-Capacity Sub-6GHz Solution for Next-Generation Networks
The new FibeAir 2000 Sub-6GHz radio series delivers high capacity, extended range and carrierclass performance for today's and tomorrow's networks.
FibeAir 2000 is the solution of choice for carriers looking for affordable backhaul solutions. While demand for mobile bandwidth and migration to 3G and 4G networks will require carriers to increase significantly their backhaul capacity, they can not expect a similar growth in ARPU and are thus looking for high-capacity, cost-effective backhaul solutions.
FibeAir 2000 enables carriers to accommodate capacity growth and maintain profitability through unparalleled price and excellent performance. The high-capacity radio system provides 50 Mbps full-duplex net throughput, with a flexible combination of Ethernet and up to 16 E1/T1 interfaces and a range of up to 120 km/75 miles in various sub-6GHz frequencies.
FibeAir 2000 offers native Ethernet and native TDM over a single wireless link, enabling carriers to migrate to Ethernet with no additional cost and to protect their investment in the legacy TDM infrastructure. Built on Ceragon's FA2000 proprietary air interface together with advanced built-in Diversity, MIMO and OFDM technologies, it delivers optimal performance and unmatched robustness in all environments.
FibeAir 2000 solutions are ideally suited for applications such as backhaul for cellular and WiMax networks, access and backhaul solutions for ISPs, enterprise networks, as well as for temporary applications for both carriers and private networks.
Configuration | |
---|---|
ODU: Outdoor Unit with Integrated Antenna or Connectorized for External | |
Architecture | AntennaIDU: Indoor Unit for combination of E1/T1 and Ethernet interfaces or PoE device for Ethernet only |
IDU to ODU Interface | Outdoor CAT-5e cable; Maximum cable length: 100 m |
Radio | |
Capacity | 50 Mbps capacity (net throughput, full duplex) |
Range | Up to 120 km |
Frequency Bands | 4.9 - 5.9 GHz, 2.3 - 2.5 GHz |
Channel Bandwidth | 20 MHz |
Modulation | 2x2 MIMO-OFDM (BPSK/QPSK/16QAM/64QAM) |
Automatic Channel Selection | Supported |
Max Tx Power | 27 dBm @ 2.4 GHz; 25 dBm @ 5.8 GHz |
Radio Regulation | FCC, IC (Canada), ETSI, WPC (India), China |
Duplex Technology | TDD |
Error Correction | FEC k = 1/2, 2/3, 3/4, 5/6 |
Encryption | AES 128 |
TDM Interface | |
Number of E1/T1 ports | Up to 16 |
Framing | Transparent to unframed or framed |
Timing | Independent clock per port, Tx and Rx |
Connector | RJ-45 |
Standards Compliance | ITU-T G.703, G.826 |
Line Code | E1: HDB3, T1: B8SZ/AMI (configured by FA2000 Manager) |
Latency | Configurable, 5 - 20 msec |
Impedance | E1: 120Q balanced; T1: 100Q balanced |
Jitter and Wander | Compliant with ITU-T G.823, G.824 |
Ethernet Interface | |
Number of Ethernet ports | 2 |
Type | 10/100BaseT with Auto-Negotiation (IEEE 802.3u) |
Framing/Coding | IEEE 802.3 |
Line Impedance | 100 Q |
VLAN Support | Transparent |
Connector | RJ-45 |
Maximum Frame Size | 2048 Bytes |
Latency | 3 msec (typical) |
Management | |
Management Application | FA2000 Manager |
Protocol | SNMP and Telnet |
Mechanics | |
ODU with Integrated Antenna: 37.1(w) x 37.1(h) x 9.00(d) cm; 3.5 kg | |
Dimensions | ODU Connectorized: 18.0(w) x 27.0(h) x 5.5(d) cm; 1.5 kg IDU: 48.3(w) x 4.5(h) x 29(d) cm; 1.5 kg |
Power | |
Power Feeding ref: | Dual feeding, -20 to -60 VDC (AC/DC converter is available) |
Power Consumption | < 35 W (IDU+ODU) |
Environmental | |
Operating Temperatures | ODU: -35°C to +60°C IDU: 0°C to +50°C |
Humidity | ODU: Up to 100% non-condensing, IP67 IDU: 90% non-condensing |
Safety and EMC | |
TUV | UL/EN/IEC 60950, CAN/CSA 60950 C22.2 |
EMC | CFR47 Class B, Part15, Subpart B |
Qetsi | EN 300 386, EN 301 489-4, EN 301 489-1 |
CAN/CSA-CEI/IEC, AS/NZS | CISPR 22 |